skip to main text

Making Copies

This section describes the procedure to copy with Copy.

  1. Make sure printer is turned on.

  2. Load paper.

  3. Flick HOME screen and tap Copy.

    The Copy standby screen is displayed.

  4. Load original document on platen glass or in ADF.

  5. Specify settings as necessary.

    figure: Touch screen
    1. The copy layout is displayed.

      Switch the layout (single-sided/two-sided).

    2. Tap to specify the number of copies.

      figure: Touch screen
      1. Tap the numbers to specify the number of copies.

      2. Tap to confirm the number of copies.

    3. Tap to register the current print settings as a custom setting.

    4. Tap to display the print setting items.

      figure: Touch screen

      For more on the setting items:

    5. Tap to preview an image of the printout on the preview screen.

      figure: Touch screen

      For details:

    6. Tap to specify the page size.

      figure: Touch screen
  6. Press Color button for color copying, or Black button for black & white copying.

    The printer starts copying.

    Remove the original on the platen glass or from the document output slot after copying is complete.

    Important

    • If you load the original on the platen glass, do not open the document cover or remove the original while Scanning document... is displayed on the touch screen.
    • If you load the original in the ADF, do not move the original until copying is complete.

    Note

    • To cancel copying, press the Stop button.
    • If you load the original on the platen glass, you can add the copying job while printing.

    • When the message informing you that the operation restriction is enabled, ask the administrator of the printer you are using.

Adding Copying Job (Reserve copy)

If you load the original on the platen glass, you can add the copying job while printing (Reserve copy).

The screen below is displayed when you can add the copying job.

figure: Touch screen

Load the original on the platen glass and press the same button (the Color button or the Black button) as the one which you previously pressed.

Important

  • When you load the original on the platen glass, move the document cover gently.

Note

  • When Print qlty (print quality) is set High, or you load the original in the ADF, you cannot add the copying job.
  • When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.
  • If you press the Stop button while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you tap Cancel all reservations, you can cancel copying all scanned data. If you tap Cancel the last reservation, you can cancel the last copying job.
  • If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and redo the operation. may appear on the touch screen. Tap OK and wait a while, and then try copying again.
  • If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen when scanning, tap OK and press the Stop button to cancel copying. After that, copy the documents that have not been finished copying.